Call: 0123456789 | Email: info@example.com


Let’s face it, home appliances are not cheap. In fact, they can range in price from a few hundred dollars to well over $1,000. So, once you have made the investment in your home’s appliances you want them to last as long as possible which means you are going to spend the time necessary to keep them in the best working order. For some appliances, it may be a thorough cleaning on a regular basis, changing the filters, or perhaps, calling in a maintenance provider. Of the many jobs you need to do around the house, one of the most important, yet often unmentioned, is that of maintaining your clothes dryer. Each year, there are over 15,000 home fires caused by dryer vents. To avoid becoming one of these statistics, there are several steps you can take. Simple preventive maintenance includes lg dryer repair pasadena:

Read the instruction manual so you know how best to maintain your particular dryer.
Always clean the lint filter before or after every load.
Do not dry clothing or fabric on which anything flammable has been spilled as this can cause an explosion.
Replace the plastic or vinyl exhaust hoses with rigid or flexible venting
This last one is perhaps one of the more challenging aspects of home dryer maintenance. However, if you follow the steps below, you can do it. (Of course, if you would rather avoid the trouble, call in a dryer vent professional to do it for you.) Before you begin, make sure that your dryer is unplugged and if it is a gas dryer, be sure the valve is turned off!

Use a vacuum cleaner with the brush head attachment and clean out any lint/dust in the lint tray and the lint tray cavity.
Disconnect the dryer vent in sections and clean them out-oftentimes these can be easily accessed from inside the home. If you do this section by section it will be much easier to reconstruct. Begin by disconnecting the duct joint closest to the dryer.
Use a dryer duct brush ( or a long-handled 20″ gong brush or scrub brush) attached to a drill to clean out the duct work (read instruction on package). You can also, do this without a drill, but it will take more time. Insert the brush into the duct and sweep it clean. If you do not use a drill, you will need to move the brush in a rotating motion while pushing back and forth.
After each part of the duct work has been cleaned, you can reassemble the ducting. Do this by attaching an adjustable rigid 90 elbow to the exhaust end of the dryer. Then connect the rigid metal and semi-rigid duct work sections with stainless steel duct bands.
Once all the pieces are re-attached, you can turn the gas on/plug in the dryer. Put the lint tray in its place and now you are ready to do your laundry.

 


The story

As soon as Mrs. X and her husband stepped inside the flagship electronic store they went straightaway to the home appliances section. Having lived up with the idiosyncrasy of their old mixer-grinder for some months they were looking forward to replace it with a new food processor. They both had spent considerable time thinking over it. Mrs. X, being an accomplished homemaker and an excellent cook knew exactly what she wanted. On the other hand, Mr. X, who was tech savvy, was looking at the mechanical aspects.

At the store the eager sales person showed them the entire range including the one, which, according to him was their latest model samsung appliance repair pasadena.

“The food processor looked beautiful,” Mrs. X thought, hardly able to contain her excitement.

“Unlike others it did not use belt drive,” Mr. X noticed, a glint filling his eyes. The company had not only priced it competitively but, what was most important, had features and functions Mrs. X wanted.

But they had one doubt lurking in their mind. After sales service was an unknown territory. Taking solace from the fact that the company had a reputation they decided to overlook another fact that it had entered the home appliances business only recently.

“Things hardly go wrong these days,” the technological man murmured justifying their choice. “After all their old mixer-grinder was still holding up after serving them for more than a decade, and except for some minor repairs carried out easily at their neighbourhood shop, had stood by them in good stead.” Whispered Mrs. to the man, keeping her voice low so that other shoppers do not overhear them. Brushing aside their reservations they went ahead and bought it.

Their fears come true

One month after the warranty had lapsed the motor refused to turn on. Taking it to the electrician, who had been helping them fix their old mixer-grinder, they were in for a shock.

“The spare part of this particular model is not available locally. The company has made use of a new design even for the basic parts.” The mechanic informed. “Perhaps a policy to make customers visit their service centres even for mundane repairs when the product was out of warranty.” He added as an afterthought.

Left with no option Mr. X carried it to the authorized service centre, where the courteous staff after checking the appliance informed him that the part, which needed replacement, was not in stock and it would take 7-10 days to reach them.

A week later they get a call that their food processor was ready. Having paid the bill, which expectedly was on the higher side, they brought it home. But their happiness was short-lived.

Back to square one

5-6 months later the motor again stopped working. About a month later it still waits at home biding the time when any one of the two would be free to take it to the service centre. Meanwhile Mrs. and Mr. X have bought another basic mixer-grinder after doubly ensuring from the local seller that it confirms to the universal design, that its parts are easily available and that it can be repaired at any shop.

We sincerely wish that you do not suffer like Mrs. and Mr. X and therefore, before you buy a home appliance ask yourself these questions:

How popular is the particular model (higher the popularity easier it is to source spare parts)
Service terms and conditions (whether it is on-site or you will have to carry it to the service centre)
Sales persons in their zeal to clinch the deal often make big commitments (try to verify their claims)
In case of on-site warranty confirm service charges, cartage, turnaround time, etc.
Distance of service centre from your home/office
The tentative time they take for routine repairs
Try to ascertain the availability of spares
User experiences and references (if possible talk to your local technician on the practicality of buying a particular brand or model)
Whether it can be easily repaired at your neighbourhood after the lapse of warranty
Keeping these points in mind it will no doubt lead to many years of fond association with your home appliance. Nothing can be more relaxing than the satisfaction of money well spent.


Refrigerators are one of the essential kitchen equipments. It is hard to find a modern home without a refrigerator. Like all other appliances, refrigerators also require repairs and maintenance over a period of time. Many times choosing a wrong technician for refrigeration repairs can cause more harm than good. Unqualified technicians could damage the parts of your appliance or faulty repairs could lead to breaking down of the unit more frequently. It is therefore important to choose an apt refrigeration repairs service.

1. Select a service outlet in your close vicinity samsung refrigerator repair pasadena: a glance through online business portals can help you in listing down several refrigeration repairs service providers across the globe. You must always look out for service providers in your neighbourhood because they will have the shortest turnaround time for attending to your complaints. After all you do not want to wait for weeks together before a technician turns up to attend to your refrigerator. There might be instances where your refrigerator requires a part to be replaced; in such cases non-availability of the outlet in your area would delay the repair work as your service provider would have to procure the part from some other city.

2. Opt for repair services from the manufacturer: if your refrigerator is in the warranty period and has developed some problems, you must call the refrigeration repairs service from the manufacturer. Refrigerator units are liable for free servicing during the warranty period. Even if your refrigerator is not in warranty period, it is a good idea to contact the manufacturer’s repair service as this will help you in getting original parts replaced with ease. Technicians from the manufacturer’s end will have more skill in handling your unit as it is their job to do so day in and day out.

3. Reputation of the service providers: Increasing numbers of fraudsters pose as refrigeration repairs service providers and dupe the unsuspecting clients by installing defective parts that lead to frequent break down of the refrigeration unit. It is important to therefore check the reputation of the company that is providing refrigeration repair services. Always opt for a company that is well known in the neighbourhood. You can probably ask your friends or colleagues to recommend a noteworthy repairs technician for the job.

4. Transparency: last but not the least, always hire a technician who is transparent about the job. A technician must tell you what the cause of breakdown of the unit is. He must also suggest if the entire unit needs to be replaced or only replacing certain parts of the refrigerator can help in prolonging the life of the refrigerator. If the technician uses ambiguous terms for explaining the cause of breakdown, ask him to explain it to you in common terms.


There are a few simple steps to keep in mind regarding your refrigerator to keep those repairmen at bay. Not only will taking care of your refrigerator and performing at home repairs keep it running better and longer, it will also save you a lot of money in the long run. These basic upkeep steps are simple and easy, in fact if you have children who are at the age where chores earn them an allowance; these steps are easy enough that they can do them kenmore refrigerator repair altadena.

One of the most important rules of refrigerator upkeep is to not overstock it. If overstocked, your refrigerator will have to run harder than normal to keep a balanced temperature throughout. One of the best ways to make sure that your refrigerator is not overstocked is to clean out the expired products on a regular basis. Rotating your stock so to speak will also keep your family healthier and lessen the risk of eating something that you shouldn’t. If you are adding this to your child’s chore list this can be the perfect opportunity to teach him or her, the value of eating healthy food and where to look for to see if it is still good or not.

The next most important thing to keep those refrigerator repairs at bay is not only cleaning in the refrigerator but around it as well. Debris and dust that collects underneath the refrigerator and around its heating coils on the back can keep it from reaching optimum temperature and will eventually lead to it burning itself out. Once this happens you will more than likely have to replace the entire refrigerator instead of simply calling in a repair man and replacing parts. This can get to be quite expensive in the long run so it is simply better to keep the area surrounding your refrigerator clear and the coils clean. It’s simply enough, just take a broom and sweep underneath and brush the dust off of the back. This will take no more than 15 minutes or less and will keep your refrigerator running smoothly for quite some time.

Both of these steps are easy and quick, especially if you do them on a regular basis-which you should. As in the end the small amount of time you put into the upkeep of your refrigerator will increase the time in between the need for refrigerator repairs.


Sometimes, do-it-yourself projects don’t pay off! Appliance repair is one area that should be left up to trained professionals in order to preserve personal safety and ensure satisfying results.

Everywhere you turn these days, people are talking about the satisfaction and fun you can have when you undertake “do-it-yourself” projects. In many cases, DIY can be very satisfying and allow you the chance to tailor your project to your specific tastes and needs. There are some household tasks, however, that are best left up to the professionals. One of these is appliance repair maytag washer repair pasadena.

Regardless of how easy it may seem to open up your malfunctioning appliance and solve the problem, it’s not as simple as flipping through a dryer repair manual and following the instructions. Every make, model, and brand of appliance is a little bit different, and diagnosing the source of your problem can be very tricky for a person with no practical repair experience. While many appliances appear to be relatively basic machines, it’s a whole other story once you’re inside. Let’s face it, most people have never heard of terms like “float switch” and “solenoid,” let alone recognize them, understand what they do, and tell if these parts require repairs or replacement. Major appliance repair experts know the insides of common household units like the back of their hands and have the training, skills, and appliance repair parts to bring you fast, accurate repairs.

When performing many other types of DIY projects, mistakes can be easily covered up. With appliance repair, that is not the case. When something goes wrong during a job like refrigerator repair or oven repair, the results can be irreversible, expensive, and disastrous. Some possibilities include:

Personal injury (via electrical shock, gas leak, etc.)
Irreparable damage to the appliance
Damage to counters, floors, cupboards
Damage to utility connections (water, wastewater, etc.)
Do-it-yourself projects have their place, but appliance repair is not one of them–not if you want quality results! No one will be impressed when they see a failed attempt to fix an appliance, so unless you’re 110% confident in your abilities, don’t waste your time or money on a home appliance repair project.

When you hire a professional, you enjoy speedy service, but you also have the peace of mind that your appliance repair will have the endurance to last through years of use and abuse. So if your washing machine or other appliance is on the fritz, put down the wrench and pick up the phone!


One of the most common ways for a washing machine to flood is when water builds up and floods through the soap dispenser draw, sometimes this can start as a trickle of water leaking down the front of the machine from the soap dispenser draw, then one day when your not expecting it, that trickle turns into to a almost uncontrollable flood of water.

So what can you do if this happens to you and better still what can you do to stop this from happening in the first place ge washer repair pasadena.

If you find your appliance flooding from the soap dispenser draw what you need to do is to switch the mains power off from the appliance main switch or the mains wall switch, whichever is most accessible, this will de-energize the electromagnet inside the water inlet valve causing the valve to shut and stop the water, it is possible but very unlikely but a similar type of flood could occur even with the electric already turned off, in this situation the water inlet valve would probably be faulty and need replacing, and in this case to stop the flow of water from the soap dispenser you would need to find and turn off the water on/off valve, it is normally located in a cupboard next to the appliance or behind the washing machine.

If the flooding started by itself when the machine was already off, you will probably need to call a appliance engineer to test and maybe replace the water inlet valve, if the flooding only occurs when YOU start the washing machine, then it is likely you have some kind of blockage in the machine and again because of the dangers involved I would recommend you call a engineer

While there is not a lot you can do to stop a water inlet valve from going faulty, there are to many other factors that are out off your control, there is a lot you can do to stop some of the other causes of water coming out of the soap dispenser draw.

If you keep the soap draw and housing clean of old soap, dirt and fungus this will allow the water coming into the machine to travel directly into the draw and stop small drips coming down the front of the washing machine also do not put soap tablets into the soap dispenser draw, tablets are usually deigned to go directly into the wash, if you put soap tablets into a soap dispenser draw there is a chance they will not dissolve properly and end up blocking the pipes inside your washer, also do not over fill the soap dispenser draw with whatever soap you do use, and last but not least, not all soaps are equal, if you find at the end of your wash there is still soap left in the dispenser draw, this is good indicator that you are using too much soap or the soap you are using is clumping up in the draw and not washing down into the wash properly, first try using a better brand of soap and if you are already using a good soap brand, try using less soap.


If a customer called me up and described these symptoms to me about a broken washing machine, I would be racking my brains to figure out what the problem was.

If there has been a problem with frozen pipes, it is possible that the pressure switch was also frozen. This is the switch the regulates how much water the machine takes in. If it went faulty or was frozen, it is possible the machine tried to heat up water, when in fact there wasn’t any to heat.

Same problem as boiling your kettle with no water in it lg washer repair pasadena. Not good and usually not worth repairing.

Another possibility and one I’m more inclined to think is the problem, is that the electric motor is the issue here. It is much more likely to produce smoke and the symptoms you describe.

In all honesty, I can’t think of a simple thing that would cause what you have described and I am thinking there is a big problem with your washing machine.

Just a quick note on the safety side. Fuses are all well and good and have no doubt saved many lives over the years, but they are not to be relied on. A 13 amp fuse takes nearly 28 amps to blow it (I know it’s crazy and why do they even call them 13 amp fuses if this is the case)

My advice to you is, do a local Google search for “Washing Machine Repairs (your Town)

Many local Engineers charge very little to check a washing machine out and tell you the problem. The large companies like Hotpoint and Hoover will all charge you well over £100 to do this, so I suggest you avoid them.

Look at the reviews you find in the local Google search I mentioned, you are sure to find an Engineer who will be only too happy to call and check your machine for a fair price.

Do not attempt to run your machine unless you have had it checked 1st. It’s not worth the risk.

Many of my customers call me up and ask me straight out, if I will call and simply tell them if their machine is worth repairing or not. In recent years this has become a large part of my business and I do it every day for £19, but this is not about me.

There must be 100’s of Engineers around the country who do the same thing.

So my simple advice to you is.

Don’t turn that washing machine back on unless you have had it checked 1st.

Run a quick local Google search to find a good local Engineer.

Then decide to scrap it or repair it.


If you have been complaining about your increased utility bill and you are looking for a way to lower it, then you should consider using an outdoor clothes dryer. Drying your clothes outside may feel like stepping back in time but you will reap plenty of benefits in the end.

Besides being able to save up a bit on your monthly utility bill, you are also doing your share in energy conservation. Clothes dryers eats up a huge percentage of your energy bill. In fact, an electric clothes dryer can account for one third of your electric bill. Electic dryers that are used in many residential homes nowadays consume power to provide heat just to get the drum working and that doesn’t take into account the actual time drying your clothes. When turned on and fully working, electric clothes dryer uses up four to six kilowatts of energy. When you use a dryer every day, you are not only wasting energy but also wasting your hard earned money whirlpool dryer repair pasadena.

An outdoor clothes dryer seems to be a smart solution to these problems. If you have tried drying your clothes naturally outside, you will see a big difference between electrically dried and naturally dried. Clothes dried outside carry a fresher smell. The scent from detergents and bleach is also not as strong in clothes that are dried naturally.

For white clothes, you don’t have to soak them in bleach when using an outdoor dryer since the sun’s rays help maintain their light color. Plus, sunlight is also an effective natural sanitizer. It kills the germs that cling to your clothes.

Fabrics that are dried on an outdoor clothes dryer also seem to be stiffer compared to clothes that are fresh out of an electric clothes dryer. If you don’t like your clothes, or towel, or sheets to be stiff, then there’s a simple solution to that. Put your item of clothing or articles that you don’t like stiff into your electric dryer right after sun drying them. Set your dryer into the on the air only cycle for at least five minutes so you don’t use the heat cycle and run up your electric bill. This should do the trick and will ease up some of the stiffness of your clothes. But if you like stiffer clothing then you can save on ironing and using any starch.

If you decide to go with an outdoor clothes dryer you may want to look into getting an indoor drying rack for drying clothes indoors so whenyou get a stretch of bad weather and you need to have some clean clothes you can get it done. It may take longer and your will not get the full effect of an outdoor clothes dryer but you can save it for another day.


Home appliances can break down at the worst of times and choose the occasion very carefully. The moment you turn to mixer to puree tomatoes for lunch or turn on the vacuum to clean the loft they choose to break down. If you are faced with appliance repair situation you have two choices. Either try to repair it yourself or get a professional trained technician to do the job. If you try to fix it, you could potentially add to the damage. Each device has its own system of functioning and needs to be repaired with skill, using the right techniques.

Dealing With The Problem

As a homeowner you use various types of appliances in your home and tend to take these for granted. So when urgently need appliance repair, you don’t know whom to turn to. When you aren’t able to use your fridge, washing machine or any other gadget, its best to call up a reliable appliance repair company that you know you can trust Jennair Appliance Repair Los Angeles.

The first thing you need to do is disconnect the power supply before you try and diagnose the problem, or try to repair the appliance. You can read the manual of the appliance, which has a troubleshoot guide which can give you a rough idea about why the problem occurs. In many cases the problem may be simple and easily repaired by replacing a part.

If you are unsure of repairing the device yourself, you could get it done by a technician. While there are some technicians out there who will fleece you by making your shell out more than what you have to, there are others who do not have the required knowledge to get your appliance up and running. You need to select the best technician who can provide value for money and repair your device to make it last.

Washer

If your washer is not functioning properly you need to go through a checklist to see various functions. These include the main switch, fuse box, seeing if the washer is plugged in properly, timer control, water supply valves, water pump and other factors. Washer repair is complicated and can be done by an experienced technician whom you can depend on for appliance repair.

Dryer

Before you consider dryer repair if your dryer breaks down, check the owner’s manual as there may be helpful solution charts to solve minor problems. In some cases a minor tweaking of the wires is all the repairs you need to do. You can check the electrical cord, test the door switch and test the safety fuse. If after running all checks it still does not work, you could call the repair services.

Kitchens involve a variety of gadgets and devices that are used in the home on a regular basis. The various kitchen appliances include among others

Refrigerators
Stoves
Ovens
Ice makers
Cooking ranges
Trash compactors
Freezers
Dishwashers
Garbage disposal units
Microwave oven
Your home appliances are important for the smooth running of your home and for your comfort. It is good to have basic knowledge of appliance repair but it is better if you get trained and reliable technicians with years of experience and references to repair your devices if the problems are severe.


Seeing a big puddle of water coming from your washer can be disconcerting, and the first thing that you think of is your wallet getting smaller. Well if you are looking for a guide on how to fix a leaky washing machine, then you’re in luck. In this article I will explain how to go about diagnosing and repairing your leaky washer without going through a repairman. But first here’s a note: remember to unplug your washing machine before you start any repairs. Otherwise you can risk serious damage to yourself and your appliance.

Alright, so here’s the first tip on how to fix a leaky washing machine Washer Repair Los Angeles: find the source of the leak. This is pretty self-explanatory. Empty the washer of any water that might be left over. Then put a dry beach towel underneath the machine, run the washer through a cycle with no clothes in it. Watch the towel for any wet spots that appear, also watch the drain hoses for any water beads or leaks. Leaks can come from more than one source so you should watch your machine until you are sure where it is leaking. Once you have figured that out it is time to figure out how to fix it of course.

Alright, step one is to check your hoses for leaks. This is the most common and most easily repairable of leaky washer problems. If you noticed water beading or dripping from the hoses during its test cycle then your problem is coming from your hoses. You can either cut right to the chase and replace your hoses with new ones, or you could replace the rubber washers on the inside of the hose and use Teflon tape to repair any holes or cracks. However, if you choose to tape up the hoses and you still notice leaking you should just replace them. If you are still unsure of where the leak is coming from you can move on to step two.

The next step of how to fix a leaky washing machine: check the washer pump for leaks. Now there are two different types of washers: belt-drive and direct drive. You’ll need to figure out which one yours is, and to do that you need to open up your washer’s cabinet. If you don’t see any belts then yours is direct drive, and if you do – yours is obviously a belt-drive. If you have a direct drive the fix is easy, just unscrew the pump and install the new one. If you have a belt drive the fix is a little more complicated. You will need to replace the whole assembly. Instructions can be found online, but it might be a wise idea to call a repairman out to replace it (unless you are a pretty handy do-it-yourselfer.)

If either of those repairs do not help your leaky washer problem then it could be the hoses inside of your machine, or leaky tub fittings. If you haven’t done those repairs yourself, or if you are still not completely sure where the water is leaking from then your best bet would be to call a repairman to help fix your leaky washing machine. Good luck!